Tile Mastic & Adhesive Remover

Citrus Depot » Tile Mastic & Adhesive Remover

Tile Mastic & Adhesive Remover

$0.00$129.99

MSDS | More Product Information (Printable and Downloadable)

Easily Remove Black Mastic, Glue & Adhesives!
Just pop the tile or pull up the carpet. Then pour Citrus King Mastic Remover on the surface. In about an hour you will be amazed at how the mastic turns so soft you could scrap it off with your business card! All that is needed for clean up is a water rinse.

Sizes and Prices:

1 Pint (Trial Size) – $9.99
1 Quart – $14.99
1 Gallon – $34.99

(4×1) Gallon Case – $124.99
5 Gallon – $129.99
30 & 55 Gallon – Call For Pricing
 
Select Your Amount:

Clear selection

Product Description

Citrus King Mastic & Adhesive Remover Information

Just pour and scrape for $0.10 per sq. ft.! CITRUS KING Mastic Remover makes the removal of asbestos mastic, carpet mastic, clean and simple. Does not work on Ceramic Tile Thinset. Users of CITRUS KING Mastic Remover are amazed at the Fresh Citrus Smell and Easy Clean Up properties of this product. Just pop the tile or pull up the carpet. Then pour Citrus King Mastic Remover on the surface. In about an hour you will be amazed at how the mastic turns so soft you could scrap it off with your business card! All that is needed for clean up is a water rinse.

1 gallon will cover from 100 – 250 square feet. Most of the contractors we do business, budget at 100 square feet per gallon. That way they don’t under estimate the job.

 While CITRUS KING works on cutback, emulsion and flooring / carpet adhesives, it is recommended that you test a small area first. For removing black emulsions or flooring / carpet adhesives.

Step One: Wet the entire adhesive surface with CITRUS KING. This may be done with a sprayer or by mopping CITRUS KING over the surface of the adhesive. Do not over apply CITRUS KING in the first step. Allow CITRUS KING to soak and penetrate for 10-20 minutes to soften the adhesive.

Step Two: Scrape the bulk of the soften adhesive from the floor with a floor scraper (razor scrapers are generally preferred). This will help increase the coverage of CITRUS KING and reduce the amount of liquid generated, making final cleanup easier.
Step Three: If necessary, protect walls, drains, cracks and flooring with something absorbent (rags, kitty-litter, sawdust) to keep liquefied adhesive contained.
Step Four: Reapply CITRUS KING as in step one. Agitate with a short bristled broom or floor scrubber to fully lift and liquefy adhesive residue from the sub-floor. This liquid can be absorbed with an absorbent previously mentioned and picked up for disposal.
Step Five: Wash and rinse the floor thoroughly. Allow to dry. For wood surfaces, follow steps one and two, then apply CITRUS KING to rags and wipe the surface until clean. Clean remaining residue with water. Keep in mind that wood is porous and will soak up liquids, which could affect the performance of new adhesives. Allow additional time to dry.

First Aid Details (Click Here)

If SWALLOWED: Do not induce vomiting. Call a physician or poison control center immediately.

Offer small amounts of water or milk.

EYE CONTACT: Rinse with water for 15 minutes and get prompt medical attention.

SKIN CONTACT: Remove contaminated clothing, flush with large amounts of water immediately.

If irritation persists, see a physician.

SAFE STORAGE & DISPOSAL INSTRUCTIONS: (Click Here)

    • KEEP AWAY FROM HEAT AND OPEN FLAME.

    • DO NOT CUT CONTAINER WITH TORCH AS EXPLOSION MAY RESULT.

    • DISPOSE OF CONTAINERS PROPERLY BY SELLING TO CONTAINER RECYCLERS.

    • DO NOT REFILL OR USE THIS CONTAINER FOR STORAGE OF ANY OTHER

    CHEMICAL. FOR INDUSTRIAL & INSTITUTIONAL USE ONLY.

100% NATURAL • EARTH FRIENDLY • NON-TOXIC • BIODEGRADABLE

 

Other Products:

Reviews

There are no reviews yet.

Be the first to review “Tile Mastic & Adhesive Remover”


Please type the characters of this captcha image in the input box

Please type the characters of this captcha image in the input box

Current day month ye@r *